Send inquiry
Characteristics:
1. The shell is made of high quality steel, the surface is with electrostatic spraying.
2. The outer is with observation window, which can observe the sample at any time.
3. Adopt digital display microcomputer PID regulation controller with over-temperature alarm and over temperature protection function. With timing function, the precision temperature control is reliable.
4. Hot air circulation system consists of fan which can continuous operation at high temperature and a reasonable wind tunnel to improve the temperature uniformity of the working room.
5. It adopts new synthetic silicone seal strips, can operate long time at high temperature, long life and easy replacement.
6. Can adjust the inlet air and exhaust size of the working room.
1. The shell is made of high quality steel, the surface is with electrostatic spraying.
2. The outer is with observation window, which can observe the sample at any time.
3. Adopt digital display microcomputer PID regulation controller with over-temperature alarm and over temperature protection function. With timing function, the precision temperature control is reliable.
4. Hot air circulation system consists of fan which can continuous operation at high temperature and a reasonable wind tunnel to improve the temperature uniformity of the working room.
5. It adopts new synthetic silicone seal strips, can operate long time at high temperature, long life and easy replacement.
6. Can adjust the inlet air and exhaust size of the working room.
Electrothermal Forced Air Convection Drying Oven (101-E) | |||||||||
Technical parameters | |||||||||
Model |
101-0ES 101-0EBS |
101-1ES 101-1EBS |
101-2ES 101- 2EBS |
101-3ES 101-3EBS |
|||||
Application | used for drying, baking, wax-melting, sterilization, curing | ||||||||
Air circulation type | Mechanical Convection | ||||||||
Performance | temp. range | RT+10~ 250ºC | |||||||
temp. resolution | 0.1ºC or 1ºC | ||||||||
temp. fluctuation | ±1ºC | ||||||||
temp. uniformity | ±2.5% | ||||||||
Structure | chamber material | ES refers to cold rolled steel; EBS refers to stainless steel | |||||||
shell material | spraying cold rolled steel | ||||||||
Thermal insulation material | aluminum silicate fiber | ||||||||
heating device | nichrome heating wire | ||||||||
rated power | 1.6kw | 1.8kw | 2.5kw | 3kw | |||||
vent | inner diameter 45mm, top testing hole | ||||||||
Controller | temp. control | double rows digital tubes, PID | |||||||
temp. setting | press the four keys slightly | ||||||||
temp. display |
actual temperature:displayed by 4 digit digital tube (row 1); setting temperature:displayed by 4 digit digital tube ( row 2). |
||||||||
timer | 0~9999minutes(with timing function) | ||||||||
operation function | running with data set and time set, and automatic shutdown based on setting | ||||||||
program mode | optional | ||||||||
sensor | Pt100 or K type | ||||||||
additional function | deviation calibration, menu buttons lock, power outage compensation, power outage memory | ||||||||
Safety device | over-temperature alarm | ||||||||
Specification | workroom size (D*W*Hmm) |
350*350*350 | 350*450*450 | 450*550*550 | 500*600*750 | ||||
exterior size (D*W*Hmm) |
520*640*560 | 520*740*660 | 620*840*760 | 670*890*960 | |||||
packing size (D*W*Hmm) |
640*730*670 | 640*830*770 | 730*930*870 | 970*1020*1070 | |||||
working capacity | 43L | 71L | 136L | 225L | |||||
shelf load bearing | 15kg | ||||||||
Shelf groove | 8layers | 12layers | 16layers | 23layers | |||||
height between shelves | 26mm | ||||||||
Power source (50/60Hz)/Rated current | AC220V/5.5A | AC220V/7.3A | AC220V/9.1A | AC220V/18.2A | |||||
NW/GW | 33/39kg | 47/56kg | 92/105kg | 97/107kg | |||||
Accessory | shelf | 2pcs | |||||||
shelf bracket | 4pcs | ||||||||
Optional device | shelf, RS485 port, printer, recorder, external communication, remote control, program temperature controller, wireless message alert, U disk storage. |