Product Details
Product details
BRTP06ISS0PC series applies to all types of horizontal injection machines of 30T-150T for take-out products. The up and down arm is a single sectional type. The upper and lower part, drawing part, screwing out, and screwing in of BRTP06ISS0PC is driven by air pressure, with high speed and high efficiency; After installing this robot, productivity will be increased by 10-30% and will reduce the defective rate of products, ensure the safety of operators, reduce manpower and accurately control the output to reduce waste.
Main Specification
Power Source(KVA) |
Recommendedl.M.M (ton) |
Traverser Driven |
Model of EOAT |
0.05 |
30T-150T |
Cylinder drive |
zero suctions zero fixtures |
Traverser Stroke (mm) |
Crosswise Stroke (mm) |
Vertical Stroke (mm) |
Max.loading (kg) |
/ |
120 |
650 |
2 |
Dry Take Out Time (sec) |
Dry Cycle Time (sec) |
Swing Angle (degree) |
Air Consumption (NI/cycle) |
1.6 |
5.5 |
|
3 |
Net Weight(KG) |
|
|
|
36 |
|
|
|
Model representation: I: Single cut type. W: Telescopic type. S: Product arm. S0: Driven by cylinder (Traverse-axis).
The above-mentioned cycle time are the results of our company's internal test standard. In the actual application process of the machine, they will vary according to the actual operation.
A |
B |
C |
D |
E |
1372 |
1225 |
530 |
316 |
881 |
F |
G |
H |
I |
J |
619 |
50 |
440 |
225 |
45° |
K |
|
|
|
|
90° |
|
|
|
|
No further notice if the specification and appearance are changed due to improvement and other reasons. Thank you for your understanding.
http://www.b1brobot.com/